Authors:
Ikpe Otor Mathew, Ipeghan Jonathan Otaraku, S. A. Kareem, Akuma Oji, Patience Nne Ikenyiri
Addresses:
1Department of Biochemical Engineering, Rivers State University of Technology, Port Harcourt, Nigeria. 2,4Department of Chemical Engineering, University of Port Harcourt, Rivers, Nigeria. 3Department of Chemical Engineering, Modibbo Adama University of Technology, Yola, Adamawa, Nigeria. 5Department of Chemical and Petroleum Engineering, Rivers State University, Port Harcourt, Nigeria. otorikpe@mail.com1, ipeghan.otaraku@uniport.edu.ng2, sakareem_1@mau.edu.ng3, akuma.oji@uniport.edu.ng4, ikenyiri.patience@ust.edu.ng5
Lignocellulosic biomass will soon become the key source of feedstock for bioenergy to combat the impact of global warming and the depletion of fossil fuel resources. Lignin separation costs have been a key obstacle to bioenergy generation from lignocellulosic biomass. Pulp and paper, biofuel, and biomaterials sectors depend on wood delignification. This study examines delignification trends and advances, including standard and new methods. The study begins by explaining how delignification improves wood processability and value. It describes lignin's chemical structure and properties, highlighting its role in wood's mechanical and chemical qualities. Lignin from diverse lignocellulosic biomass sources is delignified using hydrogen peroxide and acetic acid in this study. A 1:1 hydrogen peroxide-acetic acid volume ratio was used after particle reduction. Experimental results show 96%, 89%, and 80% lignin removal efficiency for Ako, Mahogany, and mixed sawdust, respectively. A 30-minute reaction at 80°C yielded these results. The hydrogen peroxide-acetic acid mixture dignifies well and may be used in lignocellulosic biomass processing. This study also provides insights into optimizing delignification procedures and suggests approaches to improve the industrial use of lignocellulosic biomass. This study reveals that HPAC dignifies wood well. Understanding HPAC's role in the delignification of wood products could lead to developing an HPAC-based pretreatment technique that lowers the cost of biofuel generation from lignocellulosic biomass.
Keywords: Hydrogen Peroxide and Acetic Acid (HPAC); Hardwood and Softwood; Lignocellulosic Biomass; Mechanical and Chemical Properties; Value of Wood Material; Fossil Fuel Resources; Hydrogen Peroxide and Acetic Acid (HPAC).
Received on: 09/07/2023, Revised on: 12/09/2023, Accepted on: 11/10/2023, Published on: 03/03/2024
DOI: 10.69888/FTSESS.2024.000145
FMDB Transactions on Sustainable Environmental Sciences, 2024 Vol. 1 No. 1, Pages: 19-30